
GTA VI’s Leonida Keys: what the causeways connect
Use the number of spans and the shape of the shore to tell similar waterside shots apart.
Start with a destination rather than a row of islands
Brian’s boatyard matters to the story because it is where the Keys crew works. Find the marina pin in our atlas and compare the width of the approach with Rockstar’s Keys images. The harbor, a raised crossing and the point at which the road enters the island are three distinct clues. A boat moored near the bridge might have arrived from the other side of the island.
A quick plan for your first island drive
Pick one residence or marina on the near side and one on the far side, then watch the turnoffs instead of focusing only on the longest bridge. A low causeway changes what you can see from the road. If you start running out of visible landmarks, a dock with two approaches makes an easier reference point than a featureless bend in open water.
Trace the connection, not the islands first
In a Keys screenshot, note whether a road crosses open water, hugs a shoreline or ends at a marina. Count any visible spans and write down which side of the road has buildings. Those details usually survive changes in light better than the color of the water.
Look for a second angle
A long lens can make disconnected islands look adjacent, while an overhead shot can hide the height of a bridge. Use another angle to verify whether there really is a connection. A visible crossing is a landmark lead until the released map or an actual route confirms where it goes.